HLK-ZW0608 HLK-ZW0608 Kit --EngrWorld

Serial number	Item	Technical Parameters
1	Module size	19*19mm
2	Sensor size	12.05*12.05mm
3	Resolution	508dpi
4	Number of pixels	160*160pixel
5	Data Connections	USART
6	Interface Protocol	RS232 (TTL)
7	Serial communication baud rate	Default baud rate 57600bps, 1 start bit, 1 stop bit, 3.3V TTL level
8	Interface and line sequence	6pin, 1.25mm horizontal sticker, please refer to the actual picture for the wiring sequence.
9	Fingerprint database capacity	100pieces
10	Storage temperatureand humidity	-40℃~+85℃; 45%~95%RH
11	Operating temperature and humidity	-25℃~+85℃; 45%~85%RH
12	False recognition rate	<0.001%
13	Rejection rate	<=1%
14	Comparison method	1 :N
15	After initialization is completed, a handshake command is actively sent.	support
16	Self-learning function	none
17	Fingerprint unique serial number	support
18	Fingerprint entry buffer definition	160*160 fingerprint head: bufferCharBuffer1, CharBuffer2 or CharBuffer3 are 0x00, 0x01, 0x02 respectively
19	Instructions use buffer definition	support
20	Fingerprint head security level	Default is level 3
21	Sensor solution	Sensor wake up
	Sleep command reliability	It is recommended that the lock end issues a sleep command during the process to support active sleep of the module.sensor
	Sensor scan time	Default 200ms
	Quiescent Current	Average current 9-10uA
	Output level	It is usually high level, and outputs low level when your finger touches the fingerprint sensor.
22	HBS system identification code	According toHBS communication protocol, the system identification code in the read system parameters (ReadSysPara) is defined according to the HBS assigned identification code, which facilitates the lock terminal to identify the fingerprint head type.
23	Module version number	hardware version:HLK-ZW0608-V1.0 Software version:G1.10.4
24	Three-proof paint application requirements	1. Press HBS Engineering Department defines and implements the specifications, which requires the thickness to be greater than 0.05mm and the coating to be even. 2. Whole lock 96After H salt spray, the fingerprint head does not appear abnormal (such as functional failure or abnormal power consumption).
25	ESD requirements: Contactdischarge: ±8KV Air discharge: ±15KV	HBS static electricity requirements: 1. The fingerprint head needs to be subjected to two types of contact discharge and air discharge, with at least 6 groups of each voltageAfter x10 discharges, there should be no functional failure or abnormal power consumption. 2. The number of test samples is required to be greater than 5pcs
25	Inspection report of the third police station	Support authentication
27	Technical standard	satisfyGA701-2007/GA374-2019 standard, including anti-radiation interference capability

HI-LINK (HK)CO.. LIMITED

公司

支持

联系我们