HLK-RM65 HLK-RM65-A（不带散热片） --EngrWorld

HLK-RM65 is a high-performance embedded WIFI6 AX3000 module launched by Hi-Link Electronics, which is highly integrated the on chip system wireless network router module uses the MT7981B+MT7976C+MT7531A scheme, with a theoretical maximum wireless speed 574Mbps+2402Mbps. Used for high wireless performance, home entertainment, and home automation.

The SoC used is manufactured using advanced silicon technology and integrates dual core ARM ® Cortex-A53MPCoreTM, working up to 1.3GHz frequency and more DRAM bandwidth. It also includes various peripherals, including SGMII and USB3.0 (host) port. two 2.5Gbps HSGMII Ethernet interfaces have also been implemented. MT7981B, combined with RF chips, can provide

the WIFI6 AX3000 wireless router platform provides a dual frequency concurrent chipset solution.

Features

Power (2.4GHz and 5GHz) MIMO 802.11 A/B/G/N/AC/AX RF, power 20/40/80/160MHz
Flash/DDR3 expansion contains DDR3/DDR4-2133 2GB/4GB
Power: 2.4-2.4835GHz 5.180-5.885GHz
Chengdu 2.4GHz/5GHz PA, LNA
Cable connection method: I-PEX generation 1
Mouth wan. lan1. lan2. lan3. lan4. lan5. usb3.0;
Wide area network access PPPoE, mobile IP, IP, 3G/4G/5G
Static address configuration, virtual server configuration, port forwarding DMZ
Organization name: DC3.3V5A

Diagram

Technical Specifications

Model	Mode	HLK-RM65
Wireless parameters	Wireless standards	2.4-2.4835GHz				5.180-5.885GHz
	Transmitting power	802.11b: +23±1.5dBm (11M)				802.11a: +20±1.5dBm (54M)
		802.11g: +20±2dBm (54M)				802.11n(20M): +18±2dBm (MCS7)
		802.11n(20M): +19±2dBm (MCS7)				802.11n(40M): +18±1.5dBm (MCS7)
		802.11n(40M): +19±1.5dBm (MCS7)				801.11ac(20M):+17.5±2dBm (MCS9)
		801.11ac(20M):+17±2dBm (MCS9)				801.11ac(40M):+17.5±1.5dBm (MCS9)
		801.11ac:(40M)+17±1.5dBm (MCS9)				801.11ac(80M):+17.5±1.5dBm (MCS9)
		802.11ax(20M): +17±1.5dBm (MCS11)				802.11ax(20M): +17±1.5dBm (MCS11)
		802.11ax(40M): +16.5±1.5dBm (MCS11)				802.11ax(40M): +17±1.5dBm (MCS11)
						802.11ax(80M): +17±1.5dBm (MCS11)
						802.11ax(160M): +15.5±1.5dBm (MCS11)
	Receiver sensitivity	Unit:dBm	ch1	ch6	ch13	unit:dBm	ch50	ch114	ch163
		2G BW20: (MCS0) -	-93.5	-93.5	-93.5	5G BW20: (MCS0)	-92.5	-92.5	-92.5
		2G BW20:(MCS7)	-74.5	-74	-74	5G BW20:(MCS7)	-73.5	-73.5	-73.5
		2G BW20: (MCS9)	-68.5	-68	-68	5G BW20: (MCS9)	-68	-68	-68
		2G BW20: (MCS11)	-63	-63	-63.5	5G BW20: (MCS11)	-62	-62	-62
		2G BW40: (MCS0)	-90.5	-90.5	-90.5	5G BW160: (MCS0)	-83	-83	-83
		2G BW40: (MCS7)	-71.5	-71.5	-71.5	5G BW160: (MCS7)	-64.5	-64.5	-64.5
		2G BW40: (MCS9)	-65.5	-65.5	-65.5	5G BW160: (MCS9)	-58.5	-59	-59
		2G BW40: (MCS11)	-60	-60	-60	5G BW160: (MCS11)	-53	-53.5	-53.5
	Antenna form	External: I-PEX first generation antenna base * 5
Hardware parameters	Storage	DDR3: 256M(2Gbit); Nand Flash: 128M(1Gbit)
	Hardware port	UART,GPIO, SPI,USB,PWM
	Ethernet port	Gigabit Ethernet port * 6: WAN * 1, LAN * 5
	USB	Partial foot multiplexing			USB3.0*
	PCIe				PCIe*1
	SGMII				2.5G SGMII*1
	Working voltage	3.3V
	Working current	Continuously sending=>Average: 2.8A@3.3V (It is recommended to have a 3.3V power supply capacity of over 5A) In normal mode=>Average: 1.27A@3.3
	IO drive capability	VMax：12ma
	Temperature	Working temperature:-20℃~80℃
	Passage size	60*90mm
	Storage temperature	Temperature: -40~+85 ℃, relative humidity: 5% -90% RH (non condensing)
Software parameters	Wireless network type	STA/AP/APClient
	Upgrade command	Web page upgrade, command network port upgrade
	Network protocol	IPv4, TCP/UDP
	Software environment	Openwrt
	User profile	Web page configuration

Product pictures

Electrical parameters

Parameter	Min	typical	Max	Unit
Module supply voltage	3.1	3.3	3.5	V
Chip supply voltage	3.1	3.3	3.5	V
I/O voltage	3.1	3.3	3.5	V
Module average power consumption	4.0			W
Module current peak	2.8			A
Power supply current requirements		≥5		A
Power supply ripple requirements		≤50		mV
ESD contact discharge		±2		KV
ESD non-contact discharge		±2		KV

	类型	描述
	产品类型	以太网模块
	制造商	Shenzhen Hi-Link
	厂牌	Hi-Link
	协议	MIMO IEEE 802.11a/b/g/n/ac/ax
	天线形式	外接天线 * 5 (双频 2.4/5.8G 天线)
	接口	UART/GPIO/PWM/SPI/I2C/USB
	工作电流	持续发送: ~2.8A (@3.3V/≥5A) 正常模式: ~1.27A (@3.3V)
	工作电压	3.3V
	工作温度	-20℃~+60℃
	长宽高	60x90x3mm

服务申明

快递

支持七天无理由退货

如果快递丢失，支持退货

如果快递损坏，支持退货

支持90天内免费换货

安全与隐私

安全付款:未经您的同意，我们不会与任何第三方分享您的个人信息。

安全的个人资料:我们保护您的隐私，确保您的个人资料安全可靠。

支付安全

与受欢迎的支付合作伙伴合作，您的个人信息是安全的。

HI-LINK (HK)CO.. LIMITED

公司

支持

联系我们